RM50 with Threaded Rods for Masonry (CFS+)

Universal polyester (styrene free) resin - European Approval for 15 substrates - Cartridge Free System (CFS+)

The most contemporary general use bonded anchor
Approved for 15 substrates
Quick, secure and simple installation
Unique soft foil pack for less waste
Effortless extrusion due to the patented self-opening system with manual or battery dispenser guns
Product with wide spectrum of use in the medium load capacity area
Ideal for applications where mechanical anchors are not suitable
Suitable for multiple use. Partly used product can be reused after fitting new nozzle

Product Code	Resin	Description / Resin Type	Volume
Product Code	Resin	Description / Resin Type	[ml]
R-CFS+RM50-4	RM50	Styrene Free Polyester Resin	300
R-CFS+RM50-600-8	RM50	Styrene Free Polyester Resin	600

R-STUDS

Size	Product Code			Anchor		Fixture
	Steel class 5.8	Steel class 8.8	Steel grade A4	Diameter	Length	Max. thickness t_fixfor:		Hole diameter	Max. thickness t_fixfor: R-STUDS		Max. thickness t_fixfor: [English]: R-STUDS HYBRID	Max. thickness t_fixfor: R-STUDS	Max. thickness t_fixfor: [English]: R-STUDS HYBRID
				d	L	h_{nom, 6d}	h_{nom, 12d}	d_f	h_nom,min	h_{nom, 12d}	h_nom,min	h_{nom, 6d}	h_{nom, max}
				[mm]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]
M8	R-STUDS-08110	R-STUDS-08110-88	R-STUDS-08110-A4	8	110	52	4	9	40	4	-	-	-
M8	R-STUDS-08160	-	R-STUDS-08160-A4	8	160	102	54	9	90	54	-	-	-
M10	R-STUDS-10130	R-STUDS-10130-88	R-STUDS-10130-A4	10	130	58	-	12	58	-	-	-	-
	R-STUDS-10170	-	R-STUDS-10170-A4	10	170	98	38	12	98	38	-	-	-
	R-STUDS-10190	-	R-STUDS-10190-A4	10	190	118	58	12	118	58	-	-	-
M12	R-STUDS-12160	R-STUDS-12160-88	R-STUDS-12160-A4	12	160	73	1	14	85	1	-	-	-
	R-STUDS-12190	-	R-STUDS-12190-A4	12	190	103	31	14	115	31	-	-	-
	R-STUDS-12220	-	-	12	220	133	61	14	145	61	-	-	-
	R-STUDS-12260	-	R-STUDS-12260-A4	12	260	173	101	14	-	101	185	-	-
	R-STUDS-12300	-	R-STUDS-12300-A4	12	300	213	141	14	-	141	225	213	45
M16	R-STUDS-16190	R-STUDS-16190-88	R-STUDS-16190-A4	16	190	75	-	18	-	-	111	75	-
	R-STUDS-16220	-	R-STUDS-16220-A4	16	220	105	9	18	-	9	141	105	-
	R-STUDS-16260	-	R-STUDS-16260-A4	16	260	145	49	18	-	49	181	145	-
	R-STUDS-16300	-	R-STUDS-16300-A4	16	300	185	89	18	-	89	221	185	-
	R-STUDS-16380	-	R-STUDS-16380-A4	16	380	265	169	18	-	169	301	265	41

Drill hole to the required diameter and depth for stud size being used.
Insert foil into gun and attach nozzle.
Solid substrates: Clean the drill hole thoroughly with brush and hand pump at least four times before installation.
Insert mesh sleeve into the hole with required depth and diameter
Dispense to waste until even colour is obtained.
Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 100% of its depth.
Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
Attach fixture and tighten the nut to the required installation torque

AERATED CONCRETE

CERAMIC SOLID SUBSTRATES

HOLLOW SUBSTRATES

Minimum working and curing time

RM50

RM50-S

*For wet concrete the curing time must be doubled

RM50-W

*For wet concrete the curing time must be doubled

Need documents for other product? Visit our Technical Library.

go to library

Something went wrong... Please try again.

Your request will be sent to our sales department. Please note this is not a purchase order.

Associated products