RV200 with Threaded Rods (CFS+)

Products Bonded anchors CFS+ Cartridge Free System Vinylester Resins CFS+ RV200 with Threaded Rods (CFS+)

High performance vinylester resin approved for use in cracked and non-cracked concrete - Cartridge Free System (CFS+)

RV200 with Threaded Rods (CFS+)

Technical Data Sheet

RV200 with Threaded Rods (CFS+) - Technical Data Sheet

Features and benefits

Approved for use with threaded rods for use in cracked and non-cracked concrete (EAD 330499-00-0601)
Suitable for use in low temperatures (down to -20°C for winter option) enables use throughout the year
Suitable for use in dry or wet substrates and water filled holes
Anchor does not generate tensions in the substrate which enables RV200 to be specified where closer edge and spacing distances are required
Unique soft foil pack for less waste
Effortless extrusion due to the patented self-opening system with manual or battery dispenser guns
Very high load capacity
Rapid bonding time enables quick execution of works
Winter version can be used in warmer temperatures for faster curing
Suitable for multiple use. Partly used product can be reused after fitting new nozzle

Product information

Product Code	Resin	Description / Resin Type	Volume
Product Code	Resin	Description / Resin Type	[ml]
R-CFS+RV200-4	RV200	Styrene Free Vinylester Resin	300
R-CFS+RV200-600-8	RV200	Styrene Free Vinylester Resin	600

R-STUDS

Size	Product Code			Anchor		Fixture
	Steel class 5.8	Steel class 8.8	Steel grade A4	Diameter	Length	Max. thickness t_fixfor:		Hole diameter	Max. thickness t_fixfor:
				d	L	h_{nom, 6d}	h_{nom, 12d}	d_f	h_nom,min	h_{nom, max}
				[mm]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]
M8	R-STUDS-08110	R-STUDS-08110-88	R-STUDS-08110-A4	8	110	52	4	9	40	-
M8	R-STUDS-08160	-	R-STUDS-08160-A4	8	160	102	54	9	90	50
M10	R-STUDS-10130	R-STUDS-10130-88	R-STUDS-10130-A4	10	130	58	-	12	48	-
	R-STUDS-10170	-	R-STUDS-10170-A4	10	170	98	38	12	88	38
	R-STUDS-10190	R-STUDS-10190-88	R-STUDS-10190-A4	10	190	118	58	12	108	58
	-	R-STUDS-10135-88	-	10	135	63	3	12	-	-
M12	R-STUDS-12160	R-STUDS-12160-88	R-STUDS-12160-A4	12	160	73	1	14	65	-
	R-STUDS-12190	-	R-STUDS-12190-A4	12	190	103	31	14	95	30
	R-STUDS-12220	-	R-STUDS-12220-A4	12	220	133	61	14	125	60
	R-STUDS-12260	-	R-STUDS-12260-A4	12	260	173	101	14	165	100
	R-STUDS-12300	R-STUDS-12300-88	R-STUDS-12300-A4	12	300	213	141	14	205	140
	-	R-STUDS-12130-88	-	12	130	43	-	14	-	-
M16	R-STUDS-16190	R-STUDS-16190-88	R-STUDS-16190-A4	16	190	75	-	18	71	-
	R-STUDS-16220	R-STUDS-16220-88	R-STUDS-16220-A4	16	220	105	9	18	101	11
	R-STUDS-16260	-	R-STUDS-16260-A4	16	260	145	49	18	141	51
	R-STUDS-16300	-	R-STUDS-16300-A4	16	300	185	89	18	181	91
	R-STUDS-16380	-	R-STUDS-16380-A4	16	380	265	169	18	261	171
	-	R-STUDS-16160-88	-	16	160	45	-	18	-	-
M20	R-STUDS-20260	R-STUDS-20260-88	R-STUDS-20260-A4	20	260	117	-	22	117	-
	R-STUDS-20300	R-STUDS-20300-88	R-STUDS-20300-A4	20	300	157	37	22	157	37
	R-STUDS-20350	-	R-STUDS-20350-A4	20	350	207	87	22	207	87
	-	R-STUDS-20220-88	-	20	220	77	-	22	-	-
M24	R-STUDS-24300	R-STUDS-24300-88	R-STUDS-24300-A4	24	300	128	-	26	132	-
M30	R-STUDS-30380	R-STUDS-30380-88	R-STUDS-30380-A4	30	380	166	-	32	-	-

Base material

Cracked concrete C20/25-C50/60
Non-cracked concrete C20/25-C50/60

For use also with

High-Density Natural Stone
Solid Brick
Solid Concrete Block
Solid Sand-lime Brick
Reinforced concrete

Applications

Curtain walling
Balustrading
Handrails
Canopies
Cable trays
Formwork support systems
Heavy machinery
Lighting columns
Public seating
Large panel reinforcing system - Copy Eco

Installation guide

Installation guide

Installation guide

Installation guide

Installation guide

Installation guide

Installation guide

Installation guide

Installation guide

Installation guide

Installation guide

Drill hole to the required diameter and depth for threaded rods size being used.
Clean the hole thoroughly with brush and hand pump at least four times before installation.
Insert foil into gun and attach nozzle.
Dispense to waste until even colour is obtained.
Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
Immediately insert the rebar, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
Attach fixture and tighten the nut to the required torque.

Installation data

R-STUDS

Size			M8	M10	M12	M16	M20	M24	M30
Thread diameter	d	[mm]	8	10	12	16	20	24	30
Hole diameter in substrate	d₀	[mm]	10	12	14	18	24	28	35
Hole diameter in fixture	d_f	[mm]	9	12	14	18	22	26	32
Min. hole depth in substrate	h₀	[mm]	h_nom + 5	h_nom + 5	h_nom + 5	h_nom + 5	h_nom + 5	h_nom + 5	h_nom + 5
Min. substrate thickness	h_min	[mm]	h_nom + 30 ≥ 100	h_nom + 30 ≥ 100	h_nom + 30 ≥ 100	h_nom + 30 ≥ 100	h_nom+ 2d₀	h_nom+ 2d₀	h_nom+ 2d₀
Installation torque	T_inst	[Nm]	10	20	40	80	120	180	300
Min. spacing	s_min	[mm]	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40
Min. edge distance	c_min	[mm]	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40	0.5 * h_nom ≥ 40
MINIMUM EMBEDMENT DEPTH
Min. installation depth	h_nom,min	[mm]	60	70	80	100	120	140	165
MAXIMUM EMBEDMENT DEPTH
Min. installation depth	h_{nom, max}	[mm]	100	120	145	190	240	290	360

Minimum working and curing time

RV200

Resin temperature	Concrete temperature	Curing time*	Working time
[°C]	[°C]	[min]	[min]
5	-20	-	-
5	-15	-	-
5	-10	-	-
5	-5	240	60
5	0	180	40
5	5	120	20
10	10	80	12
15	15	60	8
20	20	45	5
25	30	20	2
25	40	10	0.5

*For wet concrete the curing time must be doubled

RV200-W

Resin temperature	Concrete temperature	Curing time*	Working time
[°C]	[°C]	[min]	[min]
5	-20	1440	100
5	-15	960	60
5	-10	480	30
5	-5	240	16
5	0	120	12
5	5	60	8
10	10	45	5
15	15	30	3
20	20	10	2
25	25	-	-
25	30	-	-
25	40	-	-
25	45	-	-
25	50	-	-

*For wet concrete the curing time must be doubled

Downloads

Need documents for other product? Visit our Technical Library.

go to library

Contact us to get information about product availability and its price

Where to Buy
request product

Something went wrong... Please try again.

Fill in the form with your details and send request for a RV200 with Threaded Rods (CFS+)

Your request will be sent to our sales department. Please note this is not a purchase order.

Associated products

RT-MAXA Drill bits Aggressor SDS max
R-GUN Pneumatic Dispenser Gun CFS+
RT-SDSR Drill bits Rebardrill SDS plus
R-GUN Dispenser Gun CFS+