TFIX-8ST Universal facade fixing with integrated insulation cap

The first thermal insulation combination screw fixing that can be countersunk together with the integrated insulation cap.

Accurate countersunk setting automatically sets the fixing flush with the insulation layer
Integrated insulation cap (with unique surface reinforcement) equalizes thermal conductivity over the fixing point, whilst also leveling out drying times of render.
Unique sleeve compression zone for precision installations.
Simple countersunk installation in all substrates (A,B,C,D,E).
The long plastic overmoulding on the TFIX-8ST screw minimises thermal bridging (value 0.001-0,002W/K), contributing to energy-saving benefits
The shortest embedment depth at the maximum strength parameters
Unique design allows for high load-bearing capacities. This reduces the quantity of fixings required per square metre of insulation
Plate stiffness (value 0.6 kN/mm) ensures smooth elevation surface and stable insulation system.
Pre-assembled elements of the fixing saves time and labour

Drill a hole of required diameter and depth
Drilling depth of min 35mm in A,B,C,D materials and 75mm in Aerated Concrete Block
Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached
Embedment depth of min 25mm in A,B,C,D materials and 65mm in Aerated Concrete Block
When using the KWX-63 the teeth should be embedded in the insulation material after hammering.

Need documents for other product? Visit our Technical Library.

go to library

Something went wrong... Please try again.

Your request will be sent to our sales department. Please note this is not a purchase order.

Associated products